Don't waste time, get your Affordable Drill Tower today!!!
All photographed images, illustrations, drawings, renderings, sketches (‘image[s]’) are the property and copyright of Affordable Drill Towers, LLC. Images owned by Affordable Drill Towers, LLC are protected under National and International Copyright Laws. No images or their parts may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical or otherwise without prior written permission from Affordable Drill Towers, LLC. Affordable Drill Towers, LLC is assertive in pursuing circumstances where it perceives the copyright of its work has been breached and where it perceives the law has been broken.
Overall Height: 38' (+/-) Tall
Top Floor: 34' (+/-) Tall
Width: 13' Wide (center-of leg)
Length: 18' Wide (center-of leg)
Material: High-Strength Carbon Steel
See "Optional Accessories" below.
Click on the button below to take a 360º tour of the B.A.T.
Because this is a large file, it is best viewed on a computer
(versus a smart phone or tablet)
It takes a minute to load, so be patient.
Overall Height: 44' (+/-) Tall
Top Floor: 40' (+/-) Tall
Width: 16' Wide (center-of leg)
Length: 15' Wide (center-of leg)
Stairs: 2 per Floor
Material: High-Strength Carbon Steel
This Fire Fighter Challenge Tower can be used to train, practice, or host Firefighter Combat Challenge® type events.
The Vertical Ladder with Safety Cage allows for safe access between the Ground Level & the 2nd Floor (21' approx.).
The Safety Cage also allows for Vertical Confined Space Rescue, Advancing Hose Lines, and as a secondary means of access/egress.
Just like the Baclony/Instructor's Platform, there is an Access gate on the 2nd Floor to prevent falling into the Vertical Ladder shaft.
Complete wrap of all steel flooring, outside edge, to minimize hose
lines from expanding off the drill tower, and tools and appliance from
Ask them yourself...
Use a 24’ Ladder to the lower Balcony, and a 35’ Ladder (or Aerial Ladder) to the upper Balcony to effect simultaneous ladder rescues
When seconds count, make sure you and your crews know how to escape! Whether using a personal escape device, or doing a ladder bailout, practice make perfect..
The Window Prop simulates a realistic window opening, approximately 28"W x 36"T, which is secured to the Affordable Drill Tower 2nd level. Similar in size to the "Denver Drill" Prop, the Window Prop is constructed using pressure-treated lumber.
The Window Prop allows you to train on entering and exiting a window from a ladder (ground or aerial). Whether it's for rescue, fire attack, or ventilation, every fire department will be operating above ground level and must be proficient.
The Outriggers increase overall footprint of the Affordable Drill Tower by 20’ in length and width. With the Outriggers installed, your footprint is 33’ wide by 38’ long.
On Side 1, the dual 4’ wide by 10’ long Outriggers extend the 1st floor, giving firefighters more room for hose practice, while leaving the center bay unobstructed for rappelling.
The California Drill Tower already exceeds the base to height requirement as set forth by OSHA and CAL-OSHA, but with the addition of the Outriggers, not only has your options for training scenarios increased, but your Affordable Drill Tower is even more stable than ever.
Sides 2 and 4 are both 8’ wide by 10’ long and each has a segmented floor that is perfect for through-the-floor, or vertical rescue scenarios.
Side 3 is similar to Side 1, and is perfect for Ladder Operations, and acts as an off-set mezzanine to the balconies. You can span the two Outrigger Bays, horizontally with a ladder to simulate moving from rooftop to rooftop or spanning load-bearing walls to access a trapped fire fighter.
The Outriggers add 20’ of length to the ground floor, which can be enclosed to create hallway, which adds a new dimension to stretching hose lines and moving equipment.
If you choose to add the Outriggers to your Affordable Drill Tower, why not include our Roff Simulators?!
Vertical Ventilation Props can be added to Sides 2 and 4.
Our Flat Roof Prop allows your crews to practice, train-on, and perfect their skills while performing Vertical Ventilation on a Commercial Flat Roof.
Our Pitched Roof Prop allows your crews to practice, train-on, and perfect their skills while performing Vertical Ventilation on a Residential Pitched Roof (pitch: approx. 5/12).
Click on a file to download.
Copyright © 2023 Affordable Drill Towers LLC - All Rights Reserved.
Created by: Affordable Drill Towers LLC